Posted on Sunday, February 14, 2021
Fleetguard: FS19768
Donaldson: P550550
LuberFiner: LFF9594
This is the 2 micron fuel filter that is a direct fit for all AirDog I, AirDog II, and AirDog II-4G models.
Cross Reference Numbers: (Note, this is for fitment and not micron rating):
NAPA: 3420
WIX: 33420
Baldwin: BF-7531
Fleetguard: 5613
Donaldson: P551315
LuberFiner: LFF3545
Posted on Sunday, February 14, 2021
This is the water separator that is a direct fit for all AirDog I, AirDog II, and AirDog II-4G models.
Cross Reference Numbers:
NAPA: 3616
WIX: 33616
Baldwin: BF-1275
Fleetguard: FS19768
Donaldson: P550550
Posted on Thursday, September 10, 2020
Today we're going to cover the installation of the BR10 GoRhino Front & BR20 Rear bumper for the 15-19 Chevy Silverado 2500/3500 HD! The BR10 model features a place for a winch, aftermarket fogs, shackles and more!
A few Notes before we go into detail on this Bumper. First we'll start with the Front Side BR10. Ship weight is 188 pounds for the front bumper alone and 67 pounds for the winch tray.
Posted on Saturday, May 30, 2020
2017-2019 GM Duramax Hood Vent Removal and Install
Whether yours might be broken or just want to change out the color to match here's a quick and easy tutorial on how to change out the hood scoop vent.
Step 1: Take out the trim rivets on each side on the bottom side of the hood.

Posted on Thursday, April 16, 2020
We see and get ask this question on a daily basis and its the simple "Which lift pump is better Fass or Airdog."
I will start off by saying that either one will get the job done and has proven to be efficient over the years and will only continue to improve. I will get into the little details of each and let you decide but again both are great products with lifetime warranty on the pumps for the original purchaser.
We'll be comparing the new Airdog II 4G and the Fass Signature Titanium Series pumps as these the newest pumps for each company!
Posted on Monday, March 16, 2020
Screamin Diesel Performance released their new Lbz-Lmm Duramax air intakes so we got a hold of one and did some fit testing and had some quick install notes.
SDP offers top notch quality and fitment. The Turbo Inlet (horn) is a larger 3.75” ID to a smooth transition 4” intake pipe!
Posted on Wednesday, January 8, 2020
Posted on Thursday, January 2, 2020
Duramax Hydroboost Fix & Upgrade Mod
Anybody with the 01-10 duramax 2500HD or 3500HD knows the very common issue of the hydroboost going bad along with the Power Steering Pump. If left long enough it does have the potential to take out your power steering pump as well.
Posted on Friday, November 29, 2019
Some prefer the new Edge Pulsar units, and others prefer the Banks Derringer's. In this segment we'll dive into the pros and cons of each, as well as other non biased opinions from other shop owners. We'll show data from the Pulsar and the Derringer from their respective companies, and then later on we'll have 3rd party shops show side by side comparisons on the dyno.
Posted on Friday, November 15, 2019
Next up in our Blog series is replacing leaky transmission cooler lines on our LBZ Duramax. This is a very common issue and happens because of another cheap design by GM. While you can go back with OEM lines, we highly recommend either have a local hose shop build you hoses and fittings or buy a kit like the one we'll be installing. Both Deviant Race Parts and Fleece make repair line kits. They do slightly differ as the 01-05 will be different than the 06-10 trucks.
Pages